Aims Power PWRINV10KW12V — 12VDC to 120VAC Modified Sine Inverter, 10000 Watt

Overview: The Aims Power PWRINV10KW12V delivers 10000W continuous output of modified sine wave AC power from a 12VDC source. It uses Pulse Width Modulation technology for softened starts and includes built-in monitoring and protections for reliable operation. Key features: - 10000W max continuous power with 20000W peak surge capability - Modified sine wave output using Pulse Width Modulation (soft start) - Front-panel volt meter to monitor battery voltage and front-panel amp meter to display current draw - Over Temperature and Over Load LED indicators - Over Temperature protection and Over Load protection - AC direct connect terminal block and AC output short circuit protection - Single thermally controlled cooling fan - Internal fuse protection and auto reset on most fault conditions - Pre-wired for remote on/off switch and on/off switch on chassis - Pre-slotted mounting plate and aluminum case for optimal cooling - Instruction manual included, plus Free 1 year tech support and 1 Year warranty parts and labor Important installation note: THIS INVERTER REQUIRES TWO SETS OF 4/0 CABLE ( TOTAL OF 2 NEGATIVE AND 2 POSITIVE). Specifications: - Continuous output power: 10000 Watt - Surge power capability (peak power): 20000 Watt - DC input / operating voltage: 10 to 16 volts - Output voltage: 120 volts AC +/- 10% - Output wave form: modified sine wave with phase correction - Output frequency: 60 Hz +/- 1 Hz - Battery low voltage alarm: 10.5 +/- 0.5 volts - Battery low voltage shutdown: 10.0 +/- 0.5 volts - No load current: < 1.8 DC amps - Full load efficiency: 90% - 1/3 load efficiency: 95% - No load minimum operating temperature: 30º F - Full load maximum operating temperature: 140º F - AC output socket type: quadruple type 2 -3 prong - High input voltage protection: 15V-17V - Low input voltage shutdown: 10V - Internal fuse protection - UL maximum recommended per outlet 1500 watts Note: To operate at the full 10000 Watt rating, this inverter requires 2 sets of 4/0 AWG cable.