ZY-1S Portable Electric Baler Manual Strapping Machine 12-14mm Width Belt Package Machine Maximum Tightening Force 60kg ,Comprehensive Strapping Machine

1. Fast heating switch Power on power supply After turning on the power, press and hold the quick heating switch with your hand, warm up for 1-2 minutes, and release to enable. Insert the end of the plastic band under the reed and place it under the front presser foot.

Fixed plastic band Wrap the fixed plastic tape around the package at one end, and pull the other end in parallel on the rear presser foot. Swing the handle forward and forward, bind the package tightly, and insert the other end across the upper knife, In the middle of the lower cutter.

Cut and glue the tape Hold the fuselage with your left hand, and press down on the front handle with your right hand to the end, that is, the synchronization will be completed immediately after cutting and bonding. Release the front handle to return it to its original position.

Complete Press the handle toward the operator, so that the rear foot lifter lifts the rear presser foot and exits one end at the same time; at the same time, press the front presser foot handle to raise the front presser foot, and tilt the machine to move all the plastic tape. The packing can be completed. Continue the packing and repeat the above operations.