Victron Phoenix Inverter 12/250 120V VE.Direct with GFCI Duplex Outlet [PIN122510510]

Provide 120V AC power from 12V, 24V or 48V 'leisure' or automotive batteries with the Victron Phoenix Inverter 12/250. This model includes a GFCI duplex outlet and a VE.Direct communication port for system integration and monitoring. Connectivity and control - VE.Direct communication: connect to a computer using the VE.Direct to USB interface cable. For Apple and Android smartphones, tablets, MacBook and other devices use the VE.Direct Bluetooth Smart dongle. - Fully configurable parameters include low battery voltage alarm trip and reset levels; low battery voltage cut-off and restart levels; dynamic cut-off (load-dependent cut-off level); selectable output voltage 210 - 245V; frequency 50 Hz or 60 Hz; ECO mode on/off and ECO mode sensitivity. - Monitoring: input and output voltages, percentage load and alarm notifications. Performance and features - Proven topology: full-bridge design with a toroidal transformer for long-term reliability. - Robust protection: inverter is short-circuit proof and protected against overheating from overload or high ambient temperatures. - High start-up capability to run loads such as LED lamp drivers, halogen lamp transformers or electric tools. - ECO mode: when enabled the inverter will enter standby if load drops below the preset level (minimum load: 15W). While in standby the unit will briefly power on at adjustable intervals (default: every 2,5 seconds). If the load rises above the preset threshold the inverter stays on. - Remote on/off: can be wired to the two-pole connector or between battery plus and the left-hand contact of that connector. - LED diagnosis: refer to the manual for LED status explanations. Automatic transfer - For seamless transfer to another AC source, Victron recommends the Filax Automatic Transfer Switch. Filax provides a very short switchover time (less than 20 milliseconds), allowing computers and other sensitive electronics to continue operating without interruption. Inverter specifications - Cont. Power at 25 degrees C: (1) 250VA - Cont. Power at 25 degrees C / 40 degrees C: 200 / 175W - Peak Power: 400W - Output AC Voltage / Frequency (adjustable): 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1% - Input Voltage Range: 9,2 - 17 / 18,4 - 34,0 / 36,8 - 62,0V DC - Low Shut Down (adjustable): 9,3 / 18,6 / 37,2V (dynamic, load dependent) - DC Low Shut Down (fully configurable): dynamic cut-off, see https://www.victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoff - DC Low Restart & Alarm (adjustable): 10,9 / 21,8 / 43,6V - Battery Charged Detect (adjustable): 14,0 / 28,0 / 56,0V - Max. Efficiency: 87 / 88 / 88% - Zero-Load Power: 4,2 / 5,2 / 7,9W - Default Zero-Load Power in ECO Mode (default retry interval: 2,5 s, adjustable): 0,8 / 1,3 / 2,5W - ECO Mode Stop & Start Power Setting: adjustable - Protection (2): a - f - Operating Temperature Range: -40 to +65 degrees C (fan-assisted cooling) Enclosure and physical - Material & Color: steel chassis and plastic cover (blue Ral 5012) - Battery connection: screw terminals - Maximum cable cross-section: 10mm² / AWG8 - Standard AC outlets: 230V models: Schuko (CEE 7/4), IEC-320 (male plug included); UK (BS 1363); AU/NZ (AS/NZS 3112). 120V models: Nema 5-15R, GFCI - Protection category: IP 21 - Weight: 2,4kg / 5,3lbs - Dimensions (H x W x D, mm): 86 x 165 x 260; (H x W x D, inch): 3.4 x 6.5 x 10.2 Accessories and compliance - Remote on-off: Yes - Automatic Transfer Switch: Filax - Safety standards: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 (3) - EMC: EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3 - Automotive Directive: ECE R10-4 Notes and protections 1) Nonlinear load, crest factor 3:1 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too high Support and documentation - For returns, repairs or support please contact your dealer. - LED diagnostics and other details are described in the owner's manual. Additional product details - GFCI: Yes - Box Dimensions: 6"H x 9"W x 13"L - WT: 7.3 lbs - UPC: 8719076050193 - Documentation: Quick Guide (pdf), Owner's Manual (pdf), Brochure (pdf)