VDIAGTOOL VC300 Digital Coating Thickness Gauge, Car Paint Metal Coating Probe Tester

1500 Groups Data Storage + Trend Wave: VC300 car paint probe stores up to 1500 groups of data, and shows the data change in the trend wave graph. You could notice the abnormal data easily that can help to find out the part which is most likely painted Limit Alarm Function + 2 Measurement Modes: VC300 Car coating thickness meter can set data limits (both highest and lowest). When the data detected is beyond the limits, the value shows in RED and the corresponding icon appears 2 Measurement Modes, the single (sng) and continuous (ctn) measurement. It enables both measurements of microns and mils. If you turn on the μm/mil unit, the 2 units' results will appear on the screen at the same time Automatic Substrate Recognition: Automatically identifying the iron or aluminum substrate, the screen quickly displays the substrate material, Fe stands for ferromagnetic substrate, and NF stands for non-ferromagnetic materials, such as aluminum, aluminum alloy, copper, etc. It is widely used in the inspection field of automobile manufacturing, metal processing industry, chemical industry, commodity Voice Prompt + HD 360° Rotated Screen With Backlight: Voice prompt data when detecting an area hard to reach. With a digital LCD backlight, this car paint thickness meter can read data clearly in a dark environment. The 360° rotated screen allows you to read the data easily from any angles Built-in Battery + Basic/Zero-Point and Offset Calibration: Built-in 1000mhA lithium battery, can be re-charged with a USB cable. Just press the calibration button (Left Button) and put the different standard foils in sequence, you can adjust the value by pressing the up/down button to make it the same as the standard foils Measurement Range: 0-1500μm/59mil Resolution: 0.1μm/0.01mil (<100μm) 1μm/0.1mil (≥100μm) Measurement Error: ±5μm(≤150μm) ±(3 PercentH+1μm)(>150 μm)