TP-Link Archer BE9300 — Tri-Band Wi‑Fi 7 Router, Up to 9.2 Gbps, 6-Stream, 2.5G WAN & LAN

Next-generation Wi‑Fi 7 performance: The TP-Link Archer BE9300 brings Wi‑Fi 7 to your home for higher throughput, reduced latency, better anti-jamming and improved efficiency. Built for bandwidth-heavy tasks, it supports 6-stream tri-band connections for demanding applications. Wireless speeds up to 9.2 Gbps: Aggregate next-gen throughput of up to 5760 Mbps on the 6 GHz band, 2880 Mbps on the 5 GHz band and 574 Mbps on the 2.4 GHz band with 6 streams — ideal for lag-free 8K streaming, AR/VR gaming, and fast downloads/uploads. Multi-Gigabit wired options: Includes a 2.5 Gbps WAN port and a 2.5 Gbps LAN port to deliver up to 2.5× the wired speed of a standard Gigabit port, plus three 1 Gbps LAN ports and one USB 3.0 port for flexible local networking and future-proofing. Extended coverage and stable links: Proprietary Wi‑Fi optimization, 6 x optimally positioned antennas and Beamforming combine to increase capacity, strengthen connections and reduce interference across your home. Multi-Link Operation (MLO): Wi‑Fi 7 MLO significantly boosts throughput, lowers latency and improves connection reliability for emerging, high-performance applications. Easy setup and remote management: Use the Tether app for guided, simple network setup and to monitor or control your network from anywhere. Advanced network protection with HomeShield: TP‑Link’s premium security service provides network and IoT protection including regular network security scans, basic parental controls, QoS settings, weekly/monthly usage reports and IoT device identification.* ISP and mesh compatibility: Works with major ISPs such as Comcast, Charter, AT&T, Verizon, Xfinity, Spectrum, RCN, Cox, CenturyLink and Frontier (a modem is required for most internet service providers). Compatible with EasyMesh routers and range extenders to create a seamless whole-home Mesh Wi‑Fi system. VPN and voice control: Built-in VPN support lets devices on your home LAN access remote VPN servers without installing VPN clients on every device. Compatible with Alexa and Google Assistant for voice control of router functions like powering guest Wi‑Fi on/off and basic troubleshooting. Additional information and usage notes: Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The statement that the Archer BE9300 can connect up to 120 devices is based on laboratory tests that simulated multiple devices on the 6 GHz, 5 GHz and 2.4 GHz bands running concurrent applications (4K video, 1080p video, 720p video, file downloads, web browsing, IP cameras and other IoT devices) in the same room. Actual wireless throughput, coverage and the number of connected devices will vary based on network conditions, client limitations and environmental factors including building materials, obstacles, traffic volume and density, and client location. Actual network speed may also be limited by the product’s Ethernet WAN or LAN port rate, the rate supported by the network cable, Internet service provider factors and other environmental conditions. ‡ Use of Wi‑Fi 7 (802.11be), Wi‑Fi 6 (802.11ax) and features such as 320 MHz bandwidth, 4K‑QAM, OFDMA and MU‑MIMO requires client devices that support the corresponding features. △ The 320 MHz bandwidth is available only on the 6 GHz band. Simultaneous use of 320 MHz on the 6 GHz band and 160 MHz on the 5 GHz band may be unavailable in some regions or countries due to regulatory restrictions. The reference to double channel width and speed compares 320 MHz to 160 MHz for Wi‑Fi 6 routers. The Lower Latency claim refers to lab test results comparing Wi‑Fi 7 routers with Wi‑Fi 6/6E routers: tests used the same single-frequency wireless interference and measured maximum latencies of Wi‑Fi 7 clients (with MLO enabled) connecting to both 5 GHz and 6 GHz bands of the Archer BE9300 (with MLO enabled) simultaneously versus Wi‑Fi 6/6E routers (without MLO). * HomeShield includes the Free Basic Plan; fees apply for the Pro Plan. Visit tp-link.com/homeshield for details. ** TP‑Link EasyMesh‑compatible products can interoperate with other EasyMesh devices; failed connections may result from firmware conflicts across different vendors. Some EasyMesh functions are under ongoing development and may be enabled via future software updates. This router may not support every mandatory feature ratified in the IEEE 802.11be specification; additional software updates may be required for full feature availability.