TOOL1SHOoo Portable Plastic Steel Belt Packaging Machine for PET or PP Binding

Notes 1. Improper operation, over-tensioning, not using strapping as required, and sharp corners of the load can cause the tightening force to drop, or the strapping to break. Please adjust the tension and welding time from small to large to find the right operation for your strapping. 2. If you are using it for the first time, please increase the tightening force clockwise (do not adjust to the maximum). If the packing tape is too thin, try adding a shim under the tightening tooth plate, oradd two pieces. If you have been using it for a while, it is possible that the tape debris is sticking to the tooth plate, please clean the tape debris around the fastening tooth plate. If you can't tighten it after a long period of use, it is likely that the tightening tooth plate is worn and needs to be replaced. If the band is too thin, try replacing the long spring and adding shims under the weld plate. 3. Please charge for 90 minutes before the first use. If the LED shows red or does not light up after power is on, the battery is exhausted. 4. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included. 5. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Application：It is suitable for plastic and PP belts with a width of 13-16mm(1/2''-5/8'') and a thickness of 0.4-1.2mm/0.01-0.04inch. It is widely used in the paper industry, aluminum industry, textile industry, steel industry, logistics metal industry, and other industries. TOOL1SHOoo COLLECTION is a professional tool and equipment company aiming to provide quality products and services. If you have any problems, please feel free to contact us and we will reply to your in 24 hours.