TOOL1SHOoo OT-ML-132 Boating Boat Motor sku-3324914361

The TOOL1SHOoo OT-ML-132 is a Black Boating outboard motor, sku-3324914361, with a 3.6HP 2-stroke engine, water cooling and a short shaft. UPC: 722487558149. It is intended for small watercraft such as kayaks, canoes, dinghies and inflatable boats. An anti-vortex board sits above the propeller to steady water flow.

Motor vents help dissipate heat, and a push-button latch opens the engine cover for access. The source says the motor can be used on a boat under 100 kg carrying up to 4 people; speed varies with the load. Read the manual and its safety instructions before use. Gear oil is not included: add it before use and replace it after the 10-hour run-in period.

Keep clear of electrical and rotating parts while the engine runs. Do not start it on the bank; test it in the river. Stop the motor if cooling water stops coming out, then check the pump impeller and water outlet for a blockage. The seller compares its noise to a motorcycle but gives no decibel measurement. After use in seawater or turbid water, rinse the engine with fresh water.

The source warns that letting cooling water drain while the engine is left out can allow water to enter the cylinder through the exhaust port. Use up the gasoline before long-term storage, then store the engine in a dry, ventilated place out of direct sunlight.

The seller lists CE certification only, notes a possible 1-3 cm manual-measurement error and slight color variation from lighting, and says it replies to inquiries within 24 hours.