TFCFL F6100 Aluminum Panel Spot Welder Puller Vehicle Dent Spotter Puller Welding Kit 110V 3000W

Stable and Durable: It is made of 1.2mm aluminum with high-strength aluminum-magnesium alloy studs, imitation pull-up limiting device, pure copper transformer, and pure copper welding wire, which is not easy to rust, break, and corrode, and ensures long-term stable use. Fast Heating Repair: Because of the poor tensile ability of the aluminum body, it is impossible to realize spot welding and straight pulling like the iron body. The combination of a fast puller and heat spray gun can make the aluminum body dent parts realize fast pulling and repairing. High-efficiency Welding: Its force point and welding point are in a straight line, and it takes only 0.3 seconds to weld once by intelligent induction, which improves the repairing precision and ensures that the repairing work is completed efficiently. Fast Charging and Discharging: Equipped with a large storage capacitor that can withstand more than 1 million times of charging and discharging current, the storage process takes only 0.3 S and has a long service life, ensuring that the machine is welded securely. Double Grounding Design: Because aluminum body repair is suitable for nearby grounding, a unique point grounding head is designed separately to fully ensure the current direction and prevent arc deviation, solving the inconvenience of grounding clamps. Machine Control System: Thanks to its high-precision PCB control board components and multilayer chip technology, its Microsoft control system has intelligent built-in expert parameters and is infinitely adjustable, so you only need to choose the right parameters to repair. In addition, it automatically remembers the last operation for added convenience. Notes Please check the style and size before purchasing. Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included. Since the aluminum body is made of 1.2mm aluminum, inaccurate operation of the welding power may result in poor welding or penetration. Aluminum fuselage has high strength and poor local tensile properties, which makes it easy to crack. During the manufacturing process of the fuselage, the elongation rate exceeds 30% to increase its strength. Therefore, special tools must be used for maintenance. In the repair process of the aluminum body, a time-consuming task after welding the threaded nails is to screw in and screw out the threaded nails with a pull ring, which is time-consuming and laborious. Moreover, the breakage of the threaded studs at a later stage will delay the reuse of the pull ring. The aluminum body is made of an aluminum-magnesium alloy with a melting point of 1166-1202 °F. Aluminum-magnesium alloys are de-stressed and annealed at temperatures ranging from 608 to 680 °F and can be used for deformation repair. Tool-assisted heating at temperatures not exceeding this temperature must be used during the repair process. On the back side, there are also areas for strengthening the adhesive connection, which must not be heated too high. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.