TFCFL 3-In-1 Smoke Fog Bubble Machine RGB LED Light Stage Effect DJ Fogger Machine DMX Remote Control

Long Service Life: Made of high-quality iron and adopting a baking paint process, it has strong resistance to high temperature, rust, wear, and corrosion and has good performance. Cool Lighting: 28 Three-in-one LED Beads can generate six lighting modes: red, green, blue, white, strobe, and color macro move, which will completely ignite the party. Timer Function: The machine is equipped with a timer function that automatically dispenses mist and bubbles at specific time intervals (30s). It is particularly useful for creating a consistent timed effect during performances or events while reducing manual handling. Notes Please carefully read the product manual and pay attention to the safety precautions before use. Please keep this product out of the reach of children and away from flammable and explosive materials. It is normal for the machine temperature to be too high, please do not touch it with your hands. This product needs to be used in a ventilated area. The tank can be placed on the ground or installed on the top, parallel to the ground, but not tilted; Ensure that there is sufficient heat dissipation space around the fuel tank, at least 11.81 inches. A professional atomization solution (not included) is required. During the heating process, a small amount of fog will be emitted, which is a normal phenomenon. Before use, please regularly check if there is enough atomization liquid in the tank. When it is about to run out, the machine must be turned off to ensure safe use. It is prohibited to operate without liquid in the fuel tank. If any of the following conditions occur, such as reduced smoke, inability to produce smoke, or water droplets on the surface or atomizing liquid, please turn off the power immediately and check the supply of fog fluid, fuses, cables, and the power plug. Before and after each use, please clean the dirt inside the refractory pipeline with a mixture of 80% distilled water and 20% vinegar (not included). After using the product, add some water to the water tank and let the product spray out some fine water mist. After cooling, clean the machine with a dry cloth and keep it dry for storage. Add the mist again the next time you use it. The liquid is not allowed to enter the interior of the product (except the tank). If you accidentally enter, please immediately turn off the power and wait for the device to dry before use.