What is Customer Questions & Answers?

Customer Questions & Answers lets registered customers ask product-specific questions and share answers based on their experience. Questions and answers appear after moderation.

Ask about the product itself, especially details another customer may know from using it. For example: Does this camera take good pictures in low light? How long does this laptop battery last while watching movies? Does this computer have noisy cooling fans?

What shouldn't I ask?

Posts must be product questions or answers. Do not post about shipping or delivery, availability, a specific order, customer service, or material that violates our community rules. Use our FAQ or your account for order and support help. Links and contact information are not allowed in submissions.

How do I ask a question?

Sign in or register, go to the Customer Questions & Answers section on a product page, enter a title and your question, then select Ask a question. Your question appears publicly after moderator approval.

How do I answer a question?

Sign in, find a question you can answer in the product's Customer Questions & Answers section, then use Write an answer. Your answer appears publicly after moderator approval.

Why use Questions & Answers instead of an open discussion?

This section stays focused on product questions and useful answers. For orders, delivery, or customer service, use the help information in our FAQ.

Teledu Front Ball Joints Steering Sway Bar Tie Rod End For 1998 99 2000-11 Ford Ranger

Name: Teledu Front Ball Joints Steering Sway Bar Tie Rod End For 1998 99 2000-11 Ford Ranger
Brand: Teledu
SKU: prod_f6ead1e1589f823d475ceec4
Price: 196.00 USD
Availability: InStock

No rating yet(0 ratings)

1. Raise the vehicle and remove the front wheels 2. To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes 3. Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts 4.

Loosen and remove the fixing nut of the ball joint on the steering knuckle Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket 5. Remove the bad or worn ball joint from the control arm 6. Loosen the compression ball joint on the steering knuckle using a suitable special tool 7.

Clean the cone connection Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface 8. Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts 9. Reinstall front wheels.

Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer 10. Measure the chassis and adjust it using the various holes on the compression ball joint if necessary 11. Finally, carry out a test drive (1). How will I know that I have to renew my ball joint parts? Or replace them?

If your ball joint fails, you will listen to a strange sound while driving. And that sound may help you to realize that your ball joint has failed and you have to renew them (2). What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control If the ball joint breaks completely, it can be separated, and things can turn sour quickly.

The wheel will stop being nice and can even steer you off the road. It can be serious Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car (3). Are worn ball joints dangerous? Yes, it can be quite dangerous.

Because, a worn ball joint causes suspension damage, inspection failure, and breakage of related parts It might make your front suspension come apart while driving, so the wheels move in whatever direction inertia takes them. That can lead to a fatal accident (4). What happens if I don\'t replace ball joints? (5). Do I need to grease new ball joints?

I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new 1 after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation.

Follow the instruction card Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1). Rattling and thumping noises on rough roads (3). Stronger inclination of the vehicle during cornering If the sway bar stabilizer link is found to be defective, it should be replaced as described below 1.

Raise vehicle and remove front wheels Tip:Always check both stabilizer links and replace them in pairs if necessary 2. Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes 3. Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove Tip:If the ball stud also starts to turn, hold it with a suitable tool 4.

Press stabilizer link out of torsion bar 5. Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it 6. Press stabilizer link at suspension strut out of bracket Brand: Unbrand Manufacturer Part Number: EC81015801 Interchange Part Number: ES3461,EV317,K8738,K8771T,K7275,anti sway stabilizer roll bar car Placement on Vehicle: Front, Outer, Inner, Upper, Lower Custom Bundle: No Modified Item: No Superseded Part Number: control arm pressing upper and lower ball joint replacement car Universal Fitment: No Manufacturer Warranty: 10 Years Features: Greasable Items Included: Mounting Hardware Type: Sway Bar OE/OEM Part Number: car tie rod end replacement,inner and outer tie rod end,rods ends Adjustable: Yes Performance Part: No Mounting Style: Bolt-On Finish: Coated Material: Alloy Steel Cotter Pin Hole: Yes