Z Automotive Tazer Z_TZR_JLM Jeep Parts sku-518281311

Z Automotive Tazer JL Mini (model Z_TZR_JLM, SKU sku-518281311, UPC 850008078057) is a Red, Unisex Jeep Parts item measuring 6.65 × 4.25 × 1.75 in. The source lists it for 18-22 Jeep Wrangler JL and 20-22 Jeep Gladiator, including the 2020 Gladiator, and describes it as a tool for the 2018+ Wrangler JL. European JLs use side-mirror turn signals in the wiring position for halos, so halos cannot currently be installed on those vehicles. Installation involves unplugging the SGW module above the OBD2 diagnostic connector and plugging in the Tazer JL Mini. Its menus appear on the dash display and are operated with steering-wheel buttons. Vehicle settings remain in effect after the device is unplugged. They include tire size, gear ratio and transfer-case LOW ratio; TPMS enablement and front or rear pressure warnings from 25psi to 85psi; backup camera and, on 8.4 Uconnect, cargo camera input; CD wired-audio input; TravelLink/XM traffic and weather; daytime running light region, location and dropout; factory fog lights and their high-beam dropout; factory halos and BCM output; one-touch lane change; standard or LED headlight, fog light, taillight and front turn signal types, including aftermarket LEDs; trailer tow and auxiliary button settings; blind-spot detection when hardware is added or removed; and Parksense configuration. Settings can also disable the electronic sway bar, front axle disconnect module, front and rear lockers, or electronic steering pump for the modifications described in the source. Other settings change the Wrangler, Sahara or Rubicon cluster splash screen, allow dual-zone HVAC controls on a single-zone Jeep upgraded from the 5-inch radio, enable automatic headlamps if hardware is added, and enable or disable the remote's panic button. One-touch return-to-stock and quick unmarry restore vehicle settings to stock. Live functions work while the device is plugged in. They remember the last AutoStopStart and traction-control states, allow sway-bar disconnection in 2WD up to 30mph or at any speed with a mapped SwayKill button, and allow camera or media-player viewing at any speed. TurnCAM automatically shows the backup camera with turn signals on 8.4 Uconnect. Dark Mode turns off exterior and dash, radio and shifter lights while parked with the engine running. Light Show has 6 presets and 3 customizable shows, controlled by the key fob or steering-wheel buttons; it can be enabled in motion for parades, off-road use and legal police or EMS use. Rubicon axle lockers can be engaged in 2WD or 4Hi. TC Kill turns off traction control, stability control and ABS. Hood Alarm responds to hood activity when the theft alarm is armed. Cooldown runs the fans with the ignition on and engine off; Line Lock holds the front brakes; Rock Crawl holds all four brakes using steering-wheel buttons; and Winch Mode raises idle to 2000 RPM. With cruise control off, button mapping assigns quick access to the cruise up, down and right buttons. The device displays diagnostic trouble codes, clears check-engine lights, and shows 0 to 30 and 0 to 60 timers on the EVIC display. On Gladiators, it automatically blanks the license-plate lights in reverse to reduce nighttime camera glare. It also provides a vacuum/boost gauge showing manifold pressure and periodically available free firmware updates.