SMR-1000WROLL-K8 T-Rex White Roll On Truck Bed Liner, 2K Urethane, 8 quart kit

Features: True 2k urethane durability. Excellent exterior stability from UV light. Fast dry. The chemical-resistant finish is easy to use: Add hardener - shake - roll (see instructions on tech sheets above) abrasion and stain resistance protects against rust, corrosion salt, damp & extreme temperatures waterproof, flexible, helps deaden sound & vibrations provides excellent adhesion surface preparation The surface should be cleaned of all grease, oil, dirt, rust, etc before sanding. Wash the area with soap and warm water, then rinse and dry. Thoroughly clean the area with wax and grease remover. Scuff surface with 180-220 grit sandpaper Re-clean with wax and grease remover, then dry with a clean towel Instructions: Apply bed liner between 60 - 85 degrees f and humidity less than 70%, not in direct sunlight Add 8 ounces of smr-222 activator to a quart bottle of smr-1000 Screw on a quart bottle cap and shake for two minutes Remove the cap and pour into the pan See complete instructions on the tech sheet above Specification: Usable pot life at 70 degrees f / 20 degrees c 60 minutes touch dry at 70 degrees f / 20 degrees c: 1-hour subject to film build. Light duty 2 days at 70 degrees f / 20 degrees c Regular duty: 5 days at 70 degrees f / 20 degrees c Health and safety: See material safety data sheet and labels for additional safety information and handling instructions The contents of this package may have to be blended with other components before the product can be used Before opening the packages, be sure you understand the warning messages on the labels and msds™ of all components since the mixture will have the hazards of all its parts Improper handling and use, for example, poor spray technique, inadequate engineering controls, and or lack of personal protective equipment (PPE), may result in hazardous conditions or injury Follow spray equipment manufacturer™ instructions to prevent personal injury or fire. Provide adequate ventilation for health and fire hazard control Follow company, product MSDS, and respirator manufacturer's recommendations for selection and proper use of respiratory protection. Be sure employees are adequately trained on the safe use of respirators per company and regulatory requirements Wear appropriate PPE such as eye and skin protection. In the event of injury, see first aid procedures on MSDS. Always observe all applicable precautions and follow good safety and hygiene practices