NEW! EasyPatterns Plus Shop All Die Cutting 12"x75ft

NEW! EasyPatterns Plus is Beige, Unisex heat transfer vinyl in a 12"x75ft roll, listed under Shop All Die Cutting. UPC: 026271518259. This PU material is 80 microns / 3.1 mils thick and applies to 100% cotton, 100% polyester, poly/cotton blends and leather. The source title identifies the pattern as Buffalo Plaid Red.

Recommended accessories are a Siser Weeder and multipurpose paper or a heat transfer cover sheet. For a home iron, mirror and cut the design using your cutter's settings. Set the iron between Cotton and Linen, cover the design, and work on a flat, hard surface rather than an ironing board. Press firmly without sliding for 15 seconds. If an area lifts, cover it again and press for 10 seconds.

Peel the carrier hot or cold. For a heat press, mirror and cut the design, weed the excess material, cover it, and preheat the garment for 2-3 seconds. Apply at 305ºF / 150ºC with medium pressure for 10-15 seconds; EasyPress users should add approximately 30º. Peel hot or cold. Wait 24 hours before washing. Machine wash cold with mild detergent and dry on a normal dryer setting.

Do not dry clean; liquid fabric softener is not recommended.