Rockville ROCK MATRIX 4-Zone 70V Commercial Amplifier + (16) CC80T 8" White 70V In-Ceiling Speakers

Package Includes: (1) Rockville ROCK MATRIX 4 Zone 70 Volt Commercial Amplifier+Matrix Source Routing, (8) Pair Rockville CC80T White 8" Commercial 70v Ceiling Speakers For Restaurant/Bar ROCK MATRIX 4 Overview: The Rockville ROCK MATRIX is a 4-zone commercial 70V amplifier designed for multi-room installations. Total RMS power is 440 Watts @ less than 1 % THD (110 Watts RMS per zone x 4 Zones). You can assign any input source to any zone and route microphone inputs to specific zones. The unit supports 70 volt, 100 volt, 16 ohm, 8 ohm, and 4 ohm speaker configurations. Inputs include 4 line/mic channels, with selectable phantom power on two mic inputs for condenser microphones. The amplifier is 19" rack-mountable with removable brackets and includes a built-in 1W monitor speaker for listening to playback on any zone. Power Ratings: - 100 volt RMS Power: 4 x 110 Watts RMS - 70 volt RMS Power: 4 x 110 Watts RMS - 4 ohm RMS power: 4 x 110 Watts RMS - 8 ohm RMS power: 4 x 110 Watts RMS - 16 ohm RMS power: 4 x 110 Watts RMS Connectivity & Media: Built-in Bluetooth 5.0 enables wireless streaming with matrix assignment to specific zones. Play files from a USB thumb drive (32gb max) or from an SD card (32gb max), with the ability to route those sources to any zone. Controls & Protection: Individual volume controls are provided for MIC1/LINE1, MIC2/LINE2, MIC3/LINE3, and MIC4/LINE4/MP3 inputs, plus separate BASS and TREBLE adjustments. A built-in limiter and clipping indicator provide protection; a MIC 1 priority button will duck music when the mic is used. Signal levels are shown on a 6-segment meter (-10dB, -6dB, -3dB, 0dB, limit, clip). A fan cooling system keeps the unit operating at safe temperatures. CC80T 8" Ceiling Speaker Pair (x8 pairs = 16 speakers): These Rockville CC80T in-ceiling speakers come in white and are intended for restaurants, bars, cafes and commercial spaces. They offer multiple 70V tap options: 20w, 15w, 10w, 5w, 2.5w. Driver construction includes an 8" polypropylene cone woofer with rubber surround, a 1" aluminum voice coil, and a 1/2" Mylar dome tweeter. Magnet assembly uses a 20 oz. ferrite magnet. Termination is via high-quality spring-loaded push terminals, and the tweeter is aim-able for precise coverage. Paintable flush-mount grills allow a discreet finish. Speaker Specs: Frequency Response: 40Hz - 20KHz; Sensitivity: 90dB @ 1w / 1m; Impedance: 8 Ohms; Mounting Depth: 3.03"; Cut-out Diameter: 9.3".