Pure Sine Wave Solar Inverter DC 12V/24V to AC 220V — 2000W, 3000W, 4000W, 5000W Power Converter

Important installation and safety information for the pure sine wave inverter (DC 12V/24V → AC 220V). Available power ratings: 2000W, 3000W, 4000W, 5000W. - Do not connect this inverter to the utility power grid. Avoid touching the AC output conductors while the unit is energized. - Both AC output wires are live; there is no separate grounding conductor provided. Do not use either AC output as a ground wire. - Always connect the inverter directly to your load. Do not place an air switch, circuit breaker or residual-current/earth-leakage protection device between the inverter and the load. Inserting such devices in the line can fail to protect and may damage the inverter. - The battery supplied with the inverter can deliver more energy than the instantaneous consumption of the connected device. - DC cabling must be heavy gauge. Do not extend the battery cable with thin wire. Use the original wiring from the battery output to the inverter to avoid voltage drop and insufficient input current. Unauthorized extensions can reduce performance. - If an extension is unavoidable, the extension cable’s diameter must be roughly twice that of the original wiring. It is recommended that any extension not exceed 1 meter. - For purely inductive loads, the inverter’s available capacity is 95%. Follow these guidelines closely to ensure safe operation and to maintain inverter performance.