Pure Sine Wave Inverter — Peak 4000W/5000W/6000W/8000W | Continuous 2000W/2500W/3000W/4000W | DC 12V/24V/48V/60V/72V to AC — Car & Home, Remote Control

Important warnings: - Do NOT connect the inverter directly to mains/grid power. Reverse polarity (positive/negative swapped) is strictly prohibited. - Avoid overloading the unit. For inductive or motorized appliances (fridges, iceboxes, drills, washing machines, water pumps, microwave ovens, ovens, vacuum cleaners, hair dryers, etc.), choose an inverter whose continuous power rating is 3–7 times the appliance wattage. Confirm the inverter’s continuous power meets your needs before ordering or consult us. Key specifications: - Type: Pure Sine Wave Inverter - Output waveform: Pure sine wave - Remote control range: 200 meters unobstructed; 30 meters with obstacles - Peak power: 4000W / 5000W / 6000W / 8000W - Continuous power: 2000W / 2500W / 3000W / 4000W - Input voltage options: 12V / 24V / 48V / 60V / 72V - Output frequency: 50Hz±2Hz / 60Hz±2Hz - Conversion efficiency: >90% - Start method: Soft Start Protection and safety behavior: - Over thermal: Shut off output automatically - Input low voltage protection: 20Vdc±0.3V - Input high voltage protection: 30Vdc±0.3V - Recovery voltage: 24V (25.5V±0.3) - Over temperature protection: 80°±5° - Built-in protections: Overload, Short Circuit, Overtemp, Reverse Polarity, Under/Over Voltage Package contents (by input voltage type): - For 12V–24V units: 1 x Inverter, 2 x Terminal Connector, 1 x User Manual - For 48V–72V units: 1 x Inverter, 2 x Crimper, 1 x Charging Cable, 1 x User Manual Troubleshooting guide: 1) Inverter does not power on A. Verify connectors are properly seated and not loose. B. Ensure the inverter’s power switch is turned on. C. Check that the car cigarette lighter socket provides voltage (including any external leads) and that polarity is correct. 2) Inverter drives only low-power devices (insufficient output) A. Battery capacity may be too small — reduce load or use higher-capacity battery. B. Battery voltage too low — recharge or replace the battery. C. If the inverter works in another vehicle, the cigarette lighter wiring may be undersized — have a professional thicken the cable. Note: cigarette lighter socket use should not exceed 150W. D. For external batteries, use thicker leads and keep lead length short. 3) Inverter not working and FAULT light is on A. The load exceeds the inverter’s rated power — reduce connected power. B. Battery voltage is too low — charge or replace the battery. C. Reduce power draw from connected appliances. Choosing a battery and run-time calculation: Working time = U (voltage payment) × I (battery capacity) × 0.8 × 0.9 ÷ electrical power Example: 12V 50AH battery powering a 220V 100W bulb Working time = 12V × 50AH × 0.8 × 0.9 ÷ 100W = 4.32 (hours) Note: 0.8 = battery discharge coefficient (constant); 0.9 = inverter conversion efficiency (constant). Actual run time also depends on battery age and condition. Related products: Power Inverter, car power inverter, inverter, pure sine wave inverter, pure sine wave power inverter, rv inverter, inverter 3000w, 12v inverter, car inverter, inverter charger