Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Solar Power Converter Voltage Transformer

Warning and installation notes: This inverter must never be tied to the utility power grid and you must not touch the AC output conductors. The battery paired with the inverter can deliver more energy than the connected appliance consumes. Both AC output conductors are live and there is no grounding conductor provided—do not use either output as a ground. Install the inverter directly to the load; do not place an air switch or residual-current (leakage) protection device between the inverter and the load. Adding such devices inline will not provide protection and can damage the inverter. For pure inductive loads the sine wave inverter can handle up to 95% capacity. DC cable requirements: the battery-to-inverter wiring must support very high current. Do not lengthen the factory battery cables unless absolutely necessary. Unauthorized extensions can cause insufficient input current/voltage. If an extension is required, the extension cable must be approximately twice the cross-sectional diameter of the original wiring. It is recommended that any extension not exceed 1 meter.