Pure Sine Wave Inverter DC 12v/24v to AC 220V — 2000W | 3000W | 4000W | 5000W Solar Power Converter

Important safety and installation notes: Do not connect this inverter to the utility power grid, and avoid touching the AC output conductors. Both inverter output lines are live conductors — there is no built-in earth on these outputs, so never use either output as a ground. Do not insert an air switch or leak protection switch between the inverter and the load; placing such devices in-line will not provide protection and can damage the inverter. Battery and wiring requirements: The battery paired with the inverter can supply more energy than the connected device's instantaneous consumption. Keep DC cable runs from the battery to the inverter as short as possible and use the original wiring where provided. If you must extend the battery wiring, increase the conductor diameter to roughly twice the original size; unauthorized or undersized extensions can cause insufficient input voltage/current. As a guideline, extension length is not recommended to exceed 1 meter. Performance note: For inductive loads the pure sine wave inverter supports up to 95% load capacity. Follow the wiring and installation guidance to ensure reliable operation and avoid damage.