Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Solar Power Converter

Important safety and installation notes for safe operation: - Do not connect this inverter to the mains/grid. Also avoid touching the AC output conductors while the unit is powered. - The battery paired with this inverter can deliver more energy than the instantaneous power drawn by connected devices. - Both AC outputs from the inverter are live conductors and there is no earth reference; neither output should ever be used as a ground connection. - Always connect the inverter directly to the load. Do not place an air switch or a leak protection (residual-current) device between the inverter and the load — installing such devices in-line can prevent protection from working and may damage the inverter. Wiring and cable guidance: - The DC feed from the battery carries high current. Do not extend the battery cable length with undersized wire. Use the original, factory-specified wiring from the battery outlet to the inverter wherever possible. - If you must extend the cable, the extension conductor must be at least twice the diameter (cross-section) of the original wire to avoid excessive voltage drop or insufficient input current/voltage. - It is recommended that any extension not exceed 1 meter in length. Performance note: - Pure inductive load capability of this sine wave inverter: 95%.