Pure Sine Wave Inverter DC 12v/24v to AC 220V — 2000W 3000W 4000W 5000W Voltage Transformer Power Converter for Solar

Important safety and installation notes for this pure sine wave inverter (DC 12v/24v → AC 220V, available in 2000W / 3000W / 4000W / 5000W): - Do not connect the inverter to the utility power grid. The AC output lines are live; avoid touching the AC output conductors. - The battery supplied with the inverter may be able to deliver more energy than the actual consumption of the connected device. Keep this in mind when sizing and protecting circuits. - Both AC output lines from the inverter are live conductors and there is no neutral/ground on them. Do not use either output as a grounding conductor. - Install the inverter directly to the load. Do not place an air switch (circuit breaker) or residual-current/leakage protection device between the inverter and the load. Inserting such devices in the middle will not provide protection and may damage the inverter. - The inverter’s pure inductive load capability is 95%. - The DC cable between the battery and inverter must carry high current. Avoid lengthening this cable; use the original wiring from the battery outlet to the inverter. Unauthorized extensions can cause insufficient input voltage/current. If an extension is unavoidable, the extension wire’s diameter must be doubled (i.e., twice as thick as the original), and it is recommended that the total length not exceed 1 meter.