Pure Sine Wave Inverter DC 12v/24v to AC 220V — 2000W / 3000W / 4000W / 5000W Voltage Transformer Power Converter (Solar)

Important safety and installation notes: This inverter must not be connected to the utility power grid, and you should avoid touching the AC output conductors. The battery paired with the inverter may supply more energy than the device’s measured power consumption. Both AC outputs from the inverter are live conductors; there is no grounded neutral, so do not use either output as a ground. Install the inverter directly to the load — do not place any air switch (circuit breaker) or leak protection switch (RCD) between the inverter and the load. Forcing such devices in-line will not provide protection and can damage the drive. The pure sine wave inverter handles inductive loads at 95%. Battery cabling guidance: do not extend the battery leads with undersized wire. If the battery cable must be lengthened, the diameter of the corresponding wire should be doubled (the diameter must be twice as thick as the original wiring). From the battery outlet to the inverter, use the original wiring whenever possible; unauthorized extensions can cause insufficient input current/voltage. If an extension is used, keep it short — it is recommended not to exceed 1 meter.