Pure Sine Wave Inverter DC 12v/24v to AC 220V — 2000W 3000W 4000W 5000W Voltage Transformer Solar Power Converter

Important safety and installation notes: Do not connect this inverter to the utility power grid, and avoid touching the AC output conductors. The battery paired with the inverter can supply more energy than the device's actual consumption. If the battery cable must be lengthened, the diameter of the corresponding wire must be doubled in the rough. Both inverter outputs are live wires — there is no neutral/ground on these outputs; do not use either output conductor as a ground wire. Always connect the inverter directly to the load; do not install any air switch or leak protection switch between the inverter and the load. Installing such protective devices inline will not provide the intended protection and may damage the drive. Our pure inductive load capacity of the sine wave inverter is 95%. The DC output requires heavy-gauge wiring: do not extend the battery-to-inverter cable with thinner wire. Use the original wiring from the battery outlet to the inverter whenever possible. Unauthorized line extensions can cause insufficient input/current voltage. If an extension is unavoidable, the extension cable's diameter must be twice as thick as the original wiring, and it is recommended that the total extension length not exceed 1 meter.