Pure Sine Wave Inverter DC 12v/24v to AC 220V — 2000W / 3000W / 4000W / 5000W Solar Power Converter Voltage Transformer

High-efficiency pure sine wave inverter for converting DC 12v/24v to AC 220V, available in 2000W, 3000W, 4000W and 5000W models. Designed for solar and off-grid power use, this inverter delivers clean AC output suitable for sensitive electronics. Important installation and safety notes: - Do NOT connect the inverter to the utility power grid. The AC output must never be tied into the mains or used to interface with grid power, and do not touch or tie the AC output line to the grid. - Both AC output conductors are live; there is no neutral/earth ground provided by the inverter. Do not use either output conductor as a ground wire. - The battery supplied with the inverter can provide more energy than the immediate consumption of the connected device. - Connect the inverter directly to your load. Do not insert an air switch (circuit breaker) or leakage protection device between the inverter and the load — doing so will not protect the system and can damage the inverter. - The sine wave inverter supports a pure inductive load capacity of 95%. Battery cable and wiring guidance: - The DC output requires heavy-gauge wiring to carry high current. Use the original cable from the battery outlet to the inverter whenever possible. Unauthorized extensions can cause voltage drop and insufficient input current/voltage. - If you must extend the battery line, increase the wire diameter to roughly twice the original thickness. Extension length is not recommended to exceed 1 meter.