Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Voltage Transformer Power Converter for Solar

Important installation and safety notes: This inverter must not be tied into the utility power grid and the AC output conductors should not be touched. The battery supplied to the inverter is capable of delivering more energy than the connected device consumes. Both AC output conductors are live (hot); there is no dedicated earth/ground provided — do not use either output as a ground connection.

Connect the inverter directly to your load; do not place a circuit breaker or a residual-current (leakage) protection device between the inverter and the load. Installing such protection devices in-line can fail to provide protection and may damage the inverter. For inductive loads, the pure sine wave inverter provides 95% capacity.

Cable and DC supply guidance: The DC cable from the battery must handle high current — avoid extending the battery cable if possible. Use the original wiring from the battery terminal to the inverter. If an extension is unavoidable, the conductor diameter must be approximately doubled compared with the original cable, and the extension length is recommended not to exceed 1 meter; unauthorized or undersized extensions can cause insufficient input voltage/current and improper operation.