Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W, 3000W, 4000W, 5000W Solar Power Converter

Important safety and installation notes for this pure sine wave inverter: - This inverter is not suitable for connection to the utility grid. Do not feed the inverter’s AC output into mains power, and avoid contact with live AC output conductors. - Both AC output conductors from the inverter are live; neither should be used as a protective earth/ground—do not treat any output line as a ground. - For reliable operation, connect the inverter directly to the load. Do not place circuit breakers (air switches) or residual-current/leakage protection devices between the inverter and the load. Installing such devices in-line will not provide effective protection and may damage the inverter. - The battery paired with this inverter can supply more energy than the connected device actually consumes; ensure appropriate system design and monitoring. - Use heavy-gauge wiring from the battery to the inverter and keep the run as short as possible. Extending the battery cable can cause voltage drop and insufficient input current. If an extension is unavoidable, the extension conductor must be at least twice the diameter of the original cable, and total recommended length from battery to inverter should not exceed 1 meter. - This pure sine wave inverter handles inductive loads with an effective capacity of 95%. Follow these instructions to maintain performance and avoid damage to the unit.