Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Voltage Transformer Power Converter (Solar Inverter, Wide Usage)

Converts DC 12v/24v to AC 220V and is offered in 2000W, 3000W, 4000W and 5000W power variants. Important installation and safety notes: - This inverter must not be tied into the utility power grid and the AC output terminals should not be touched or used for grid connection. - The battery paired with the inverter can supply more energy than the connected device’s actual consumption. - Both AC outputs are live conductors; there is no separate grounding conductor available—do not treat either output as a ground wire. - Connect the inverter directly to the load. Do not place an air switch, residual current (leakage) protection device or similar breaker between the inverter and the load; doing so will not provide protection and may damage the inverter. - The inverter’s pure inductive load capability is 95%. - Because the DC side carries high current, do not extend the battery cable lightly. Use the original wiring from the battery to the inverter. If an extension is necessary, the extension conductor’s diameter must be doubled compared with the original wire and it is recommended that any extension not exceed 1 meter. Unauthorized or undersized extensions can cause insufficient input current/voltage and poor performance.