Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Solar Power Converter

Pure sine wave inverter for DC 12V or 24V input converting to AC 220V, available in 2000W, 3000W, 4000W and 5000W ratings. Ideal for off-grid solar and battery-powered applications when a clean AC output is required. Important safety and installation notes: - This inverter must not be connected to the electrical grid. Do not touch the AC output conductors while the unit is powered. - Both AC output conductors are live; the unit does not provide an earth/ground reference. Do not use either output conductor as a ground. - Connect the inverter directly to the load. Do not insert an air switch or residual current (leakage) protection device between the inverter and the load — doing so will not provide protection and may damage the inverter. Battery cable and wiring guidance: - Battery DC output requires thick, low-resistance wiring. Do not extend the battery cable with thin wire. Use the original wiring from the battery to the inverter where possible. - If you must extend the battery lead, the extension conductor diameter must be doubled compared to the original cable. It is recommended that any extension not exceed 1 meter. Performance note: - The inverter’s pure inductive load capability is 95%. Follow these instructions carefully to ensure safe operation and to avoid damage to the inverter.