Pure Sine Wave Solar Inverter DC 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Power Converter (Wide Use)

Important safety and installation notes for this pure sine wave inverter: 1) Do NOT connect the inverter to the mains power grid. Also avoid touching the AC output conductors. 2) The battery paired with the inverter can supply more energy than the instantaneous consumption of the connected device. If the battery cable is lengthened, the conductor diameter should be roughly doubled. 3) Both AC outputs from the inverter are live conductors; there is no separate grounded conductor. Do not use either output as a ground. 4) Install the inverter directly to the load — do not place an air switch, residual-current (leakage) protection device, or similar breaker between the inverter and the load. Forcing such devices into the line can fail to protect and may damage the inverter. 5) The inverter’s pure inductive load capacity is 95%. 6) DC cable requirements are strict: do not extend the battery output wiring unless necessary. Use the original wiring from the battery to the inverter. Unauthorized extensions can cause insufficient input current/voltage. If an extension is required, the extension conductor must be twice the diameter of the original cable. It is recommended that any extension not exceed 1 meter.