Pure Sine Wave Inverter DC 12V/24V to AC 220V — 2000W / 3000W / 4000W / 5000W Voltage Transformer Power Converter for Solar (Wide Usage)

Important safety and installation notes: This inverter must NOT be tied into the utility power grid, and the AC output conductors should not be used or treated as a mains connection. The battery supplied with the inverter can deliver more energy than the connected device’s actual consumption. If the battery cable is lengthened, the replacement conductor must have double the cross‑sectional area of the original wiring. Both AC output lines are live conductors; there is no separate grounding/neutral line provided. Do not use either output as a ground. Make a direct connection from the inverter to the load. Do NOT insert a circuit breaker, residual current device (leakage protection), or similar protective device between the inverter and the load—placing such devices in the line will not provide protection and can damage the inverter. Performance note: The pure inductive load capability of this sine wave inverter is 95%. DC cable requirements: The battery-to-inverter DC run carries high current. Do not extend the battery leads with undersized wire. Use the original heavy‑gauge wiring from the battery outlet to the inverter. Unauthorized extensions can cause insufficient input current/voltage. If an extension is absolutely necessary, the extension must use wire with twice the diameter of the original cable, and it is recommended that any extension not exceed 1 meter.