Pure Sine Wave Inverter DC 12v/24v to AC 110V/220V — 2000W 3000W 4000W 5000W Solar Power Converter

Important safety and installation notes: Do not connect this inverter to the utility power grid, and do not touch the AC output conductors while energized. Both AC outputs are live conductors; there is no neutral/ground reference on them, so do not use either output as a grounding conductor. Connect the inverter directly to your load — do not insert an air switch or leak protection switch between the inverter and the load. Installing such protection devices in-line may not protect the system and can damage the inverter. Battery and wiring guidance: The battery that operates with the inverter can supply more energy than the device’s instantaneous consumption. Because the DC output requires high current, avoid lengthening the battery cables. Use the original wiring from the battery outlet to the inverter whenever possible. If you must extend the cable, increase the wire diameter to twice the original size; unauthorized or undersized extensions can cause insufficient input voltage/current. It is recommended that any extension not exceed 1 meter. Performance note: The pure sine wave inverter supports inductive loads with a capacity of 95%.