Pure Sine Wave DC→AC Inverter 12V / 24V / 48V / 60V to 220V — 1000W, 2000W, 3000W Car Micro Power Converter (DIY, High Power)

Ensure the inverter’s DC input voltage matches your battery voltage before use — for example, pair a 12V inverter with a 12V battery. When wiring, observe battery polarity and connect positive and negative terminals correctly. Estimate runtime with: H (working time) = U (voltage volts) × I (battery capacity) × 0.8 × 0.9 ÷ electrical power Safety & installation notes: 1. Do not connect the inverter to the mains/power grid. Avoid touching the AC output conductors by hand. A battery used with this inverter may be capable of delivering more power than the connected appliance consumes. If you extend the battery cabling, increase the conductor cross-section accordingly — the wire diameter should be doubled for longer runs. 2. Both inverter AC outputs are live conductors; there is no neutral/earth reference provided by the unit. Do not use either AC output terminal as a ground. 3. Install the inverter directly to the load; do not insert any air switch or leakage protection switch between the inverter and the appliances. Placing such devices in the middle will not provide the intended protection and can damage the inverter.