Motorized Ball Valve Stainless Steel DN15-50 Full Bore Big Torque Ball Valve 2/3 Wire Electric Actuator AC220 DC24V DC12V

1. The model is simple and compact, adopts all-metal gear transmission, reliable performance and large output torque, up to 15NM. It is the best product for connecting micro valves and industrial valves. 2. After the switch is in place, the internal power is automatically cut off, no action, long service life, and the number of switches can reach more than 50,000 times. 3. The ball valve adopts a floating seal structure, no leakage, suitable for heavy dirt and long-term non-action occasions. 4. Adopt electrical and mechanical double limit, accurate positioning and high consistency. 5. The connection method between the actuator and the valve body is ISO5211 standard, which is convenient for users to assemble the valve body. 6. The protection grade is IP65, and it can be used in a relatively humid environment. 7. Alternatives to solenoid valves-fully open or fully closed to automatically cut off the power; this reduces the possibility of overheating, making it an excellent alternative for projects that need to open the valve for a long time 8. Optional voltage range: DC12V, DC24V, AC220. Notice: 1. Package list:1PCS electric Ball Valve Wiring Schematics CR01: 2-wire, (positive and negative reverse mode) wiring diagram Voltage: DC12V, DC24V Remarks: SW is a dual control switch 1. SW is connected with OPEN, the valve opens; when in place, the internal power is automatically cut off, and the valve remains in the open state 2. SW is connected with CLOSE, the valve is closed; when in place, the internal power is automatically cut off, and the valve remains in the closed state CR02: 3-wire, (three-wire two-control mode) wiring diagram Voltage: DC12V, DC24V 1. The SW is connected with OPEN, the valve is opened, and the internal power is automatically cut off when it is in place, and the valve remains in the open state. 2. The SW is connected with CLOSE, the valve is closed, and the internal power is automatically cut off when it is in place, and the valve is kept in the closed state. CR03: 3-wire, (three-wire one control mode) wiring diagram Voltage: DC12V, DC24V, AC, ADC9-24V Remarks: If the power supply is a DC power supply, the red wire needs to be connected to the positive pole, and the green wire needs to be connected to the negative pole. 1. The SW is closed, the valve is opened, and the internal power is automatically cut off when it is in place, and the valve is kept in a fully closed state. 2. The SW is disconnected, the valve is closed, and the internal power is automatically cut off when it is in place, and the valve is kept in a fully closed state. CR04: 2-wire, (power-off reset mode) wiring diagram Voltage: DC12V, DC24V, AC, ADC9-24V Remarks: POWER is an outside connect working power supply, and a capacitor is used internally as a backup power supply. The charging time is fast, and it can work in occasions with high switching frequency. 1. SW is connected with OPEN, the valve is opened, and the internal power is automatically cut off when it is in place, and the valve remains in the open state. 2. The SW is connected with CLOSE, the valve is closed, and the internal power is automatically cut off when it is in place, and the valve is kept in the closed state.