Miumaeov Wind Turbine 600W Wind Generator Kit with 8 Blades Charge Controller Wind Power Generator for Marine DC 12V Hybrid Wind Turbine Generator

Specifications: Installation Method: Vertical Type Wind Direction Adjustment: Automatically Adjust the Windward Angle Generator Type: 3-Phase AC Permanent Magnet Generator Braking Method: Electromagnetic Anemometer Battery: One 3V Lithium Battery(Included) Number of Blades: 8 Voltage: 12V Rated Power: 600W Max. Power: 650W Start-up Wind Speed: 3m/s Rated Wind Speed: 13m/s Safe Wind Speed: 50m/s Max. Wind Speed: 60m/s Working Temperature: -40 ~ 80 ℃/-40-176℉ Noise: 40db Blade Length(Each): 40cm/15.7inch Blade Diameter(Wheel Included): 92cm/36.22inch Tower Tube Diameter: 42-45mm/1.65-1.77inch(Not Included) Package Size: 72*28*23cm/30.7*11.02*9.05inch Gross Weight: 8.2kg/18.07lbs How to Install: 1. Take out the wind turbine, put it on the tower, and align it with the flange holes. Install four flat washers on the four bolts, and then insert the bolts into the corresponding holes of the flange. Tighten the screws with an Allen key. 2. The three wires of the wind turbine are connected with the transmission cable, each pair of wires is not less than 30mm, and the adhesive tape at the connection end is 100mm. 3. Connect the wind turbine cable to the controller. The battery must be connected to the controller before wiring.