Miumaeov Electrical Tools SMT Parts Counter sku-5144705997

The Miumaeov SMT/SMD parts counter is listed under Electrical Tools as sku-5144705997, UPC 749767280286. The title specifies AC110V, 60HZ and 10Kg; the operating instructions specify an AC220V supply, so check the voltage before use. The counter uses photoelectric sensing to count parts from the relationship between guide holes and components.

It has an LCD display, manual and automatic modes, a design intended to keep the material belt from falling off, and connections for a scanning gun and barcode printer. To operate it: 1) connect the power cord to the machine and the specified supply; 2) turn on POWER; 3) set the part spacing with PITCH, press ENTER and place the parts on the left tray; 4) draw out the belt, clamp it between the plate and counting gear, and align the first part's intermediate hole and blank space with the plate's middle line; 5) hold stop/reset for 2 seconds to zero the count; 6) use setting to choose manual or automatic mode, entering a target quantity for automatic operation; 7) wind the belt onto the empty plate and press forward/RIGHT to count; 8) when the motor stops at the target, adjust the count manually if inertia leaves it about 1 off; 9) press reverse/LEFT to return the tape to the original left panel, then stop it.

The gear also counts when the belt is pulled by hand. Before use, check the attachments, read and retain the manual, verify the supply voltage and connect the ground wire.