Miumaeov 4 Ratchet Load Binders 3/8" - 1/2" Boomer Chain Equipment w/ G70 Hooks 9200LBS for Tie Down 4PCS

Notes 1. Develop good lifting habits, and plan how to hang, lift and unload before the lifting work starts. 2. Make preparations: determine the weight and center of gravity of the object to be lifted and mark the lifting and weight data. Only after the center of gravity is determined can the hook be hung in the proper position. 3. The crane operator should be informed of the weight of the object to be lifted. 4. The crane hook should be hung vertically above the center of gravity of the object to be lifted. 5. The lifting object is to be lifted in such a way as to avoid damage to the lifting object, damage to the rigging itself, rotation, or dropping. The following conditions need to be observed to ensure safe lifting. 5.1 For single-leg rigging, the lifting point should be vertically above the center of gravity of the object being lifted. 5.2 In the case of double-legged rigging, the lifting point should be located on both sides of the lifting object, with the lifting point above the center of gravity. 5.3 In the case of three-legged and four-legged rigging, the lifting point should be evenly located at the level of the center of gravity of the lifted object and above the center of gravity of the object to be lifted. 6. This product is not designed or approved for high-altitude hoisting, but only for binding and tightening 7. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.