Magnetic Induction Heater Kit, 1500W 110V 4 Coil Rusty Bolt Screw Removing Tool, Handheld Automotive Flameless Heater for Car Truck Boat

Induction Heater Kit Features: 【High Working Efficiency】: This induction heater uses electromagnetic fields to heat metal, offering a faster, more precise, and efficient alternative to oxy-acetylene systems. With a maximum output power of 1.5 kW and no need for water cooling, it can heat steel to over 800°C in just 30 seconds, resulting in lower consumable costs. 【Flameless Heat】: The flameless induction bolt heater delivers excellent performance by utilizing high-frequency magnetic fields to heat metal directly. The process involves no open flame, preventing damage to surrounding parts and ensuring a safe working environment. 【Cooling System】: The automotive flameless heating tool is equipped with a cooling fan and overheating protection. It heats target areas without damaging nearby heat-sensitive components, thereby prolonging the equipment's lifespan. Its reinforced heat-stabilized thermoplastic housing ensures durability for both indoor and outdoor use. 【Magnetic Induction Heater Kit】: The magnetic induction heater kit comes with a solid, durable, and stylish blue aluminum alloy tool box for easy portability and neat storage. It includes four coils of different sizes (Φ20mm, Φ26mm, one flat coil, and one DIY coil), offering versatility to adapt to various work requirements and streamline your workflow. 【Widely Used】: The magnetic induction heater is primarily used for heating nuts and rusty screws to loosen them. It is also suitable for automobiles, machinery, and the heat treatment of various small metal parts such as bolts, nuts, screws, gears, bearings, drive shafts, pipes, and hubs. 【Operating Procedure】: 1. Loosen the two fixing bolts by turning them counterclockwise approximately 0.5 cm. 2. Select an appropriately sized coil for your task and insert its two ends into the front holes. 3. Tighten the bolts clockwise to secure the coil firmly. 4. Plug in the unit, place the element to be heated in the coil's center, then press and hold the red button. The front light will illuminate within 2-3 seconds. 5. The temperature of the heating element will rise. Once the task is complete, release the button and store the unit safely. 【Notes】: Read the manual carefully before use. Ensure the coil is fully inserted (contacts the bottom of the hole) and both sides are tightened before activating the button. Mild steel becomes visibly dark red at around 550°C, but bolts typically loosen after 10-20 seconds of heating, when they are still black in color. The surface temperature of the metal is 50-60°C lower than its internal temperature. Temperatures exceeding 550°C may overheat the nut and adversely affect its mechanical properties; therefore, avoid heating it to a red glow. Keep your work area clean and well-lit. Do not use in damp environments or immerse the unit in water to avoid electric shock hazard and machine damage. 【Specification】: Max Output Power: ≤ 1.5 kW Voltage: 110V 50/60 Hz Output Induction Frequency: 25-65 kHz Max Heating Temperature: 800 °C Continuous Heating Time: 6 Minutes Cooling Method: Air cooling Power Factor: 0.99 (PFC) Plug Types: Type H, Type B, Type G, Type E Power Cable Length: 59.05" Induction Cable Length: 31.49" Main Unit Dimensions: 1.88" x 7.91" x 3.58" Package Dimensions: 16.14" x 12.59" x 7.42" Total Weight: 10.14 lbs Package Includes: 1 x Induction Heater 4 x Coils 1 x Storage Box 1 x User Manual