Lower Ball Joint Sway Bar Tie Rod End Rack Pinion Bellow For Lexus Toyota

3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket 5.Remove the bad or worn ball joint from the control arm 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool 7.Clean the cone connection Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary 11.Finally, carry out a test drive (1).How will I know that I have to renew my ball joint parts? Or replace them? If your ball joint fails, you will listen to a strange sound while driving. And that sound may help you to realize that your ball joint has failed and you have to renew them (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car Manufacturer Part Number: EC83911401 Interchange Part Number: EV420,ES80602,ES80603,K90346,K90347,K90344,K90345,anti sway bar Placement on Vehicle: Front, Inner, Outer, Right, Left, Lower, Rear Custom Bundle: No Modified Item: No Superseded Part Number: control arm pressing ball joint car,lower ball joints replacement Universal Fitment: No Manufacturer Warranty: 10 Years Features: Greasable Items Included: Mounting Hardware Type: Sway Bar Link OE/OEM Part Number: car tie rod end replacement,inner and outer tie rod end,rods ends Adjustable: Yes Performance Part: No Mounting Style: Bolt-On Finish: Coated Material: Alloy Steel Cotter Pin Hole: Yes