KMINA 0305 White Bath Safety Rails | sku-2706809613

The White KMINA 0305 toilet safety rails and raised seat are listed under Bath Safety as sku-2706809613. The 4 Inch riser adds 4 inches of height to make sitting down and standing up easier. The steel and polyurethane frame has soft support surfaces and adjustable armrests. It fits many classic and oval toilets, with adjustments for height, width and length.

No tools are needed for assembly; the materials resist corrosion and can be cleaned and disinfected. Intended for older adults and people with reduced mobility or disabilities, the frame supports up to 330 lbs, while the raised seat supports up to 300 lbs. To assemble: 1. Position an armrest and turn its adjustment thread clockwise to secure it; armrest height adjusts from 25" to 29.5". 2.

Insert a side suction cup into the inner tube, attach the armrests to the horizontal tube and secure them with the height adjustment threads. 3. Rest the horizontal tube against the front of the toilet, adjust the width from 26.8" to 29.5", and attach the suction cups to both sides.

For the riser, insert its brackets into the side holes, loosely turn the nuts, lift both toilet lids, position the riser and tighten the side nuts clockwise. Check toilet measurements before buying: the suction-cup attachment points must be 12.5" above the floor and 12" to 18" apart, with at least 6" between those points and the wall.

The toilet's inside length must exceed 10" and its inside width must exceed 9". At a point 4" from the toilet lid, the outside width should be greater than 12.5" and less than 15"; the source also says the soft seat can be installed if measurements are higher. Check the listing pictures for fit. The listing identifies this as a pack that is not returnable.