KMINA - Toilet Safety Rails with Raised Seat (Pack, Not Returnable), 4 Inch Raised Toilet Seat with Handles for Elderly, Handicap Toilet Seat with Handles Over Toilet

PRODUCT INFORMATION ♥ STABLE AND SAFE: The toilet safety frame with riser seat is designed to provide extra support and stability while using the toilet. It prevents slipping or falling thanks to its adjustability to the toilet and it prevents over exertion of knees and hips thanks to its 4 inches of extra height. ♥ COMFORTABLE: The toilet safety rails with toilet seat riser is made of steel and polyurethane which guarantees its toughness and durability. It provides extra comfort thanks to its soft material that adapts to the user reducing pressure. ♥ ADJUSTABLE: The toilet seat riser with handles fits the majority of classic and oval toilets thanks to its curvature and its adjustability in height, widht and lenght. The armrests can be adjusted forwards and backwards for more comfortable support. ♥ EASY ASSEMBLY AND CARE: The riser toilet frame for the elderly doesn't require installation or tools. Moreover, its material makes it resistant to corrosion and it's easy to clean and disinfect. ✔ RECOMMENDED FOR: Elderly, people with reduced mobility or disabled who have difficulty in sitting on or getting up from the toilet. The toilet safety frame supports a maximum weight of 330 lbs. and the elevated toilet seat a maximum of 300 lbs. INSTALLATION : Steps to follow STEP 1 Place the armrest in the desired position, insert the adjustment thread and turn it clockwise until it is securely fixed in the tube. The height of the armrest is adjustable (25" - 29.5"). STEP 2 Insert the side suction cup into the inner tube. Then attach the armrests to the horizontal tube and fix them with the height adjustment threads. STEP 3 Place it with the horizontal tube fully supported on the front of the toilet (adjustable width 26.8" - 29.5"). Use the side suction cups to attach it to both sides of the toilet. INSTALATION: RISER Insert the brackets into the lateral holes of the riser. Turn the nuts a little but do not tighten them completely. Lift the two toilet lids, and position the riser so that it fits snugly. Turn the side nuts clockwise until the riser is fully secured and ready for use. IMPORTANT BEFORE BUYING: Check if the TOILET FRAME fits your toilet! - CHECK DESCRIPTION PICTURES The toilet frame fits standard toilets. Take these measurements to confirm that the frame can be attached to your toilet. Identify points A and B, they have to be 12.5" from the ground, where you will fix the suction cups. The distance between points A and B must be 12" to 18". Between points A and B and the wall must be at least 6". BEFORE BUYING: check if the TOILET RISER fits your toilet. - CHECK THE DESCRIPTION PICTURES Check that the inside length of the toilet (measurement A) is greater than 10". Check that the inside width of the toilet (measurement B) is greater than 9". Check 4" from the toilet lid, if the outside width of the toilet (measurement C) is greater than 12.5" and less than 15". If the measurements are higher, you can install our soft raised toilet seat without problems.