JVCC DC-UHB60FA-C Ultra High Bond Double-Sided Tape: 3/4 in x 82 ft. (Clear)

JVCC DC-UHB60FA-C Ultra High Bond Double-Sided Tape is constructed of a clear foamed acrylic system that has excellent all-around bonding properties which allows for very high performance in the most demanding of applications. Ideal for all-around bonding in the most demanding of applications. The pressure-sensitive acrylic composition has very good tack; has excellent adhesion to a variety of surfaces; and has high shear strength performance. This double-sided (AKA double-coated) tape will bond to most surfaces including many plastics, composites, sealed woods, and metals; however thorough evaluation is recommended when bonding to low energy surface material such as Polyethylene, Polypropylene, silicones, and Teflon. For lower energy surfaces may need to use an adhesive promoter/primer such as IPA (isopropanol) on the substrate prior to application. At a minimum application-pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. The dwell time the tape needs to be in contact with both surfaces before it reaches its maximum adhesion is 1 to 24 hours. Carrier/Backing: foamed acrylic. Adhesive: ultra-high bond acrylic. Release Liner: red polyethylene film. Thickness: 59.1 mils (carrier, adhesive). Adhesion: 118 ounces per inch (to stainless steel test panel). Tensile Strength: 85 pounds per inch (longitudinal). Service/Operating Temperature: -40F to 194F. Dynamic Shear Strength: 57 pounds per square inch. Short Term Temperature Resistance: up to 302F. Core: 3-inch diameter plastic.