IV8W / IV5-8MP 5 Inch CCTV Tester Monitor — 8MP AHD/TVI/CVI/CVBS, RS485 PTZ, VGA & UTP Cable Tester, DC12V 1A Rechargeable

Overview: Portable CCTV monitor and tester for analog and HD analogue systems. IV5-8MP 5 Inch HD screen with resolution 800*480 (800 (RGB) x480) provides a wide viewing angle to check camera image quality. Compatible with 8MP AHD, TVI, CVI and CVBS cameras. Video format support: Detects and displays camera feeds for HD TVI, HD CVI and AHD signals — when a TVI/CVI/AHD signal is present the unit will show the corresponding camera image. Also supports PAL/NTSC standard video signals. VGA input: Supports VGA/1:1 compliant digital input. After connecting VGA video, switch the selector to VGA Mode. Maximum supported VGA resolution is 1920*1440. UTP cable tester: Tests UTP network cable connections and shows cable connection status, cable type and the wire sequence. The tester can also read the number of the remote test box. PTZ control: Built-in Pelco-D / P PTZ control protocols via the RS485 interface. Use the tester to operate PTZ cameras (up, down, left, right) and to adjust zoom and aperture directly from the unit. Power output & battery: Provides DC12V 1A output to power cameras for demonstration and testing when an external supply isn’t available. Rechargeable with built-in 18650 2600mA battery X 2 — charge time 3-4 hour and typical working time up to 11 hours. Lighting: Integrated LED lamp for nighttime installation and maintenance. LED On/Off is controlled by a push button for easy operation. Important notes: The tester will prompt when the battery is insufficient. Do not use the unit under overload. It cannot be used while charging — wait until fully charged before operation.