Iron Pro Plus 32k Fine Mesh Water Softener PLUS KDF85 with Fleck 5600

32,000 grain capacity fine mesh resin and KDF85 softens water, removes iron, treats hydrogen sulfide, and reduces heavy metals. Treats up to 8 gallons per minute with the 3/4" mechanical Fleck 5600 control head. The fine mesh resin enables the system to soften water as well as remove low to moderate levels of iron (up to 8ppm). KDF85 reduces heavy metals and treats low levels of hydrogen sulfide (rotten egg odor).Controlled by the metered Fleck 5600 control head for effeciency and on demand treatment. Product Features Complete System 9-inchx48-inch resin tank Riser tube with distributor basket 1 cubic foot fine mesh capacity resin 5 lb KDF85 Fleck 5600 Metered Control Head Choice of connection Standard Brine Tank with Safety Float On-Demand Flow meter measures water and regenerates based on water use, not time, conserving salt and water 32k (32,000) grain capacity Contains 1 cubic foot of fine resin capable of removing up to 32,000 grains of compensated hardness (hardness factoring in iron and manganese) between regeneration cycles Fine Mesh Resin Specifically designed for treatment of both ferrous (red water) and ferric (clear water) iron, up to a maximum of 8 ppm KDF85 Media Designed to remove hydrogen sulfide (rotten egg odor), chlorine, and a wide range of heavy metals, chlorine 8 GPM Service Flow Treats a maximum flow rate of 8 gallons per minute Removes Water Hardness Ion exchange process physically removes the ions that cause hard water Removes Iron Manganese Specially designed resin traps iron and manganense as well as the hardness Treats Hydrogen Sulfide KDF85 treats low levels of hydrogen sulfide, the cause of rotten egg odor in water Eliminates Scale Water that has been softened does not form scale buildup on faucets or fixtures or inside pipes Reduces Soap Use Soft water improves soap efficiency, reducing the amount required for dishes, laundry, and bathing. Fleck 5600 Control Head Low cost metered head provides efficient treatment at an economical price Structural USA Resin Tank Durable, high quality polyglass tank made by a trusted name it tank manufacturing Standard Square Brine Tank Used for holding salt used during the regeneration process. Measure approximately 15-inchx17-inchx33-inch and holds approximately 250 lbs of salt DIY Installation Simple system connections and detailed installation instructions allow most homeowners to install this system themselves. For those who prefer to leave the work to a professional, most plumbers can install the system in 1-2 hours. Detailed Installation Instructions 5-Year Control Head Warranty 10-Year Tank Warranty Product Description Hard water causes a multitude of problems. Scale build-up restricts pipes, builds up on fixtures, and can degrade appliances. Hard water spots are also common on dishes and many other surfaces. The ions that comprise hard water attract soap molecules, requiring more soap to get the job done. This also causes an increase in soap scum and can prevent the removal of dirt and bacteria when bathing. Hard water has also been know to cause hair and skin to be brittle and dry. Iron causes rust buildup that causes appliances, fixtures, clothes, and even hair to turn a red-orange color. Manganese causes a black slime buildup, usually seen in toilet tanks and other areas where water is allowed to stand. Hydrogen sulfide (sulfur) is a common contaminate detectable by a noticable -inchrotten egg-inch odor Water softeners use an ion-exchange process to remove the ions that create hard water, eliminating hard water and the problems associated with it. Standard softening resin will only remove a small amount of clear water (ferrous) iron only. Fine mesh resin improves that capacity to a moderate level (8 ppm or less) of both clear water and red water (ferric) iron. Adding KDF85 media allows it to