Intellinet Industrial 8-Port Gigabit PoE+ Switch — PoE Passthrough, 1×95W Ultra PoE Input & 7×30W PoE+ Outputs, VLAN, NDAA-compliant

Extend PoE reach and avoid rewiring — this Intellinet industrial switch uses PoE Passthrough to double the maximum cable run between a PoE source and a powered device from 100 m (328 ft.) to 200 m (656 ft.), making ceiling and wall installations cleaner and simpler. It can also receive power from a DC adapter or an industrial power supply to deliver up to 120 W to connected devices when compatible hardware is used. Please note that no power supply is included with this product. Built for harsh environments, the metal-housed, fanless switch runs quietly and reliably even under extreme conditions. It supports DIN-rail mounting and includes two redundant DC power inputs plus multiple safety measures, making it well suited for Industry 4.0 and other IoT deployments. The unit is NDAA-compliant and backed by a three-year warranty. Power options and budgets: - Via PD port (port 8): Ultra PoE or IEEE802.3af/at compliant — PoE Budget: 95 watts (maximum) - Via DC power adapter: Input 55 V DC / up to 2.3 A — DC plug tip: OD/ID 5.5 x 2.1 mm, length 9.5 mm, inner conductor (+), outer conductor (-) — PoE Budget: 120 watts (maximum) - Via DC industrial power supply: Input 48 – 57 V, up to 2.3 A — PoE Budget: 120 watts (maximum) - Power consumption: Max. 125.0 W (with external supply). PoE-powered operation is variable depending on the input source. Protection and reliability: - Grounding points and port surge protection up to 6 kV - IEEE 802.3af/at detection with short circuit, overload and high-voltage protection - Rated for shock, freefall and vibration Network capabilities: - Eight 10/100/1000 auto-sensing ports (1 PD port + 7 PoE+ outputs) - Support for 4k MAC address entries and jumbo frames up to 9.2 kBytes - IEEE 802.3x flow control and green Ethernet power-saving technology - LEDs for power, link activity and PoE status, plus a VLAN toggle switch Mechanical and environmental: - Metal housing with DIN-rail mounting per IEC/EN 60715 (top hat) - Dimensions: 108 x 138 x 50 mm (4.25 x 5.43 x 1.97 in.) - Weight: 673 g (1.48 lbs.) - Operating temperature: -20 – 70℃ (-4 – 158°F) - Storage temperature: -40 – 75°C (-40 – 167°F) - Operating humidity: 10 – 90% RH, non-condensing; Storage humidity: 5 – 90% RH, non-condensing Note: The switch is described as operating reliably in temperatures ranging from -20 to 75℃ (-4 to 167°F) in its product overview, and is built for quiet, dependable service in demanding conditions. Standards compliance: - IEEE 802.3 (10Base-T Ethernet) - IEEE 802.3u (100Base-TX Fast Ethernet) - IEEE 802.3ab (Twisted Pair Gigabit Ethernet) - IEEE 802.3af (Power over Ethernet 802.3at Type 1) - IEEE 802.3at (Power over Ethernet 802.3at Type 2) - IEEE 802.3az (Energy Efficient Ethernet [EEE]) - IEEE 802.3x (flow control for full-duplex mode)