iMeshbean Triplex Pressure Washer Pump 3600 PSI 4.0 GPM 10 HP Replacement Triplex Pump For Horizontal Engines with 1"/24mm Solid Shaft

Specifications: Match engine power: 9.9 HP Work pressure: ≤3600PSI/250Bar Flow rate: 13-15LPM/3.5-4.0GPM Power: Max 7.4KW (Require at least 5.5KW engine) Engine speed: 1450 RPM Solid shaft: 24 mm Pump plunger bore: 18 mm Inlet: 3/4” NH thread Outlet:3/8” quick connect(19mm) Net Weight: 22 lbs Package included： 1 x replacement Pump, 1 x pressure guage, 1 x set of extra O-rings, 2 x installing rails-brackets, 1 x detergent tube ATTENTION: 1. This Pump is ONLY for Engines with 24mm Solid shaft! * 2. Install the unloader & pressure valve onto the pump before use. 3. These pumps ship with oil, replace the oil inlet cap with hole(in package) before first use, then avoid pump damage. The original one on pump is sealed in case of oil leakage in transit. 4. When installing, please ensure that the keyway is installed before running your pressure washer. Allow water to flow freely through the pump until all air is out of the lines before firing the pressure washer up! 5. Check your pressure washer's inlet and outlet orientation, mounting dimension to ensure compatibility.