HVLP Auto Paint Spray Gun 1.3mm Auto Home Industrial Spray Paint Tools Low Pressure Manual Spray Gun Cup Capacity 600ml ,Good Helper

Before use, connect the air inlet of the spray gun body to the source of compressed air (compressed air must be filtered by an oil-water separator before entering the spray gun) and connect the pressure of the air pipe to 0.45-0.5MPA Turn the mist width adjustment screw clockwise until it is tightened to obtain a circular section mist width. If you rotate clockwise, you can get the mist width of the elliptical (fan) section width you need, and adjust the length according to actual needs. Turn the spray volume adjustment screw clockwise to reduce the opening stroke of the needle , and the coating volume will decrease accordingly. Rotate counterclockwise, the spray will gradually increase. Turn the air volume adjustment screw clockwise, the air volume will gradually decrease. Rotate counterclockwise, the air volume will gradually increase. When you use it, pull the trigger slightly so that the air valve opens but the needle does not open, the compressed air flows from the air nozzle, and the dust on the painted surface can be blown away at this time, and then continue to pull the trigger backward. The spray nozzle sprays paint mist.