Gtechniq EXOV5 0.05 EXOv5 Ultra Lasting Hydrophobic Coating 50 ML

1 x 30ml or 50ml EXOv5","1 x pair of nitrile gloves","1 x AP2 Ultra Soft Foam Filled Applicator","1 x Master Instruction Leaflet","1 x WS1 Gtechniq Window Sticker","30ml","50ml","18-24 months durability","A less porous coating makes it much more resistant to clogging","Increased hydrophobic performance and dirt repellency.","Increased water contact angle of 115%. Improved water draining angle of 13 degrees.","When applying over a ceramic coating (C1 Crystal Lacquer): EXOv5 should be applied more than 2 hours but less than 12 hours after you finish the C1 application.","When applying over CSL, EXOv5 can either be applied immediately after you have finished or up to 24 hours after completing application of CSL.","If you are applying immediately after CSL application, make sure you are starting the process at the same place you did with CSL and following the same order of panels.","In addition to this kit you will need at least two but ideally fourquality","Ensure that your vehicle is out of direct sunlight but warmer than 5 degrees Celsius, is completely dry, and will stay dry for at least 12 hours after application.","If needed, polish your paintwork either by machine or by hand to remove any imperfections.","Put on the nitrile gloves provided.","Drop between 5 and 10 drops of EXOv5 onto the applicator provided. Work the liquid into the pad to get an even saturation.","Apply in overlapping strokes to an area roughly 2 x 2 (60x60cm), or work to the bodylines of the vehicle.","If the surface of the vehicle is between 40 and 60 degreesFahrenheit, wait for two minutes If the surface is between 60 and 80 degreesFahrenheitwait for one minute and for temperatures above this, remove immediately.","Fold your first microfiber towel twice to form a square, spread and remove most of the residue using a light touch.","With your second folded microfiber cloth remove all remaining residues. We advise to move your head so that you get direct and oblique views of your finish to spot all residue. It is also advisable to use bright, but flat lighting, to make residue spotting easier.