FOXWELL Automotive Diagnostic Scan Tool All Systems OBD2 Scanner Free 8 Maintenance ABS Bleeding SAS Calibration Injector Coding TPS Oil EPB BRT DPF Reset EOBD Car Code Reader Free Update

✔️Battery Registration: The battery registration is to reset the monitoring unit for the car battery via the auto diagnostic device,to clear the original fault information about the battery power shortage, to re-match it, and then to monitor the monitoring unit via taking the existing battery-related info as the standard.

✔️DPF Regeneration: The DPF regeneration function is mainly to remove the particulate matter in the trap via periodically using the combustion oxidation method (such as : heat and burn at high temperature, burn while the fuel additives or the catalysts reduces the burning point of the particulate matter), so that the performance of the trap is always the optimal stable.

✔️ABS Bleeding: When the ABS contains air, the ABS bleeding function is required to bleed the brake system, thereby recovering the brake sensitivity of the ABS. ✔️SAS Calibration: The steering angle reset is to find the relative zero position which can keep the car driving in a straight line, taking this location as a reference, the ecu can calculate the exact angles of left and right turns.

✔️Throttle Matching: The throttle matching is to initialize the throttle actuator via the automotive decoder, returning the learn value of the ECU to the initial state, so the actuation of the throttle(or idle motor) can be more accurately controlled to adjust the intake volume.

✔️EPB Reset: When the brake pad is used to a certain thickness, the brake pad sensing line will be worn, at this time the brake pad sensing line will send a signal to the on-board computer, which indicates to replace the brake pad. After replace the brake pad, the brake pad reset is required, otherwise the car will continuously alarm.

✔️Oil Reset: After the maintenance completed, the maintenance lamp will go out and the system will apply a new maintenance cycle at the same. 🌈 Full OBD2 Basic Functions Reading Codes: Present some diagnostic trouble codes after scanning the vehicle. Erasing Codes: Clear the fault codes after doing the repair according to the prompt of the scanner.

Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display. I/M Readiness: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. Freeze Frame: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

On-Board Monitor Test: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

EVAP Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. Read Vehicle Information: Display the information such as VIN, CID and CVN, etc. DTC Lookup: Supports fault code inquiry function，and review the recorded fault codes,helps you quickly find and understand code definitions.

📌 Specifications: Display：4.3" TFT color display Working Temperature：0 to 60℃(32 to 140°F) Storage Temperature：-20 to 70℃(-4 to 158°F) External Power：8-18 Volts powered by vehicle battery Usage: Plug and play 🎁 Package List: NT624 Elite Main Unit Diagnostic Cable USB Mini Cable TF Card Reader Carrying Case User Manual