Foreverun Motor 23PCS Front Wheel Drive Bearing Removal Kit Press Adapter Puller Pulley Tool Set

Package Content: Part Number -- Part SizeSleeve [A-D]: A - 4.03"(102.25mm) O.D. x 2.55"(64.65mm) Length B - 3.61"(91.68mm) O.D. x 2.55"(64.65mm) Length C - 3.41"(86.66mm) O.D. x 2.55"(64.65mm) Length D - 3.00"(76.23mm) O.D. x 2.55"(64.65mm) LengthSleeve Plate [E-F]: E - 4.03"(102.38mm) O.D. x 0.71"(18.03mm) Thickness F - 3.39"(86mm) O.D. x 0.71"(18.03mm) ThicknessBushing [G-R]: G - 3.48"(88.34mm) O.D. x 0.55"(14.01mm) Thickness H - 3.28"(83.25mm) O.D. x 0.55"(14.01mm) Thickness I - 3.21"(81.46mm) O.D. x 0.55"(14.01mm) Thickness J - 3.05"(77.55mm) O.D. x 0.55"(14.01mm) Thickness K - 2.95"(75.00mm) O.D. x 0.55"(14.01mm) Thickness L - 2.89"(73.46mm) O.D. x 0.55"(14.01mm) Thickness M - 2.81"(71.41mm) O.D. x 0.55"(14.01mm) Thickness N - 2.75"(69.75mm) O.D. x 0.55"(14.01mm) Thickness O - 2.62"(66.49mm) O.D. x 0.55"(14.01mm) Thickness P - 2.48"(62.95mm) O.D. x 0.55"(14.01mm) Thickness Q - 2.32"(58.93mm) O.D. x 0.55"(14.01mm) Thickness R - 2.16"(54.92mm) O.D. x 0.55"(14.01mm) ThicknessWasher [S]: S - 1.52"(38.6mm) O.D. & 0.91"(23mm) I.D.Sliding Forcing Screw [T]: T - 1.26"(31.95mm) Hex x 8.27"(210mm) LengthSliding Forcing Nut [U]: U - 1.25"(31.81mm) Hex x 2.36"(60mm) & 0.78"(19.75mm) I.D.Wheel Hub Installer [V]: V - 2.87"(72.93mm) O.D. x 0.79"(20.02mm) ThicknessHow to Use: Step.1 Determine if the vehicle has a trapped rotor or a floating rotor. Step.2 Assemble the tool components, and press out the worn bearing. Step.3 Lightly lubricate the new bearing, and position it for installation with the tool components assembled. Press the bearing into the spindle assembly until it bottoms. Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.) Step.5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing. Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires.Specifications: Drive Shaft: 32mm and 38mm Receiver Sleeves Size: 102mm, 92mm, 84.5mm, 76mm Adapter Drift Size: 50mm, 55mm, 60mm, 64mm, 67mm, 70mm, 72mm, 74mm, 75mm, 78mm, 82mm, 84mm, 88mm ALL-IN-ONE KIT, everything you need for a fast & effective removal and installation of wheel bearings on front wheel drive vehicles; easily replaces wheel bearings while keeping the steering knuckle and strut assembled in tact on the vehicle EFFECTIVE KIT, designed to work with the steering knuckle and strut assembly still on the vehicle, eliminating the need for front end alignment after service work UNIVERSAL COMPATIBILITY, designed for front wheel drive cars and small trucks; comes with a premium well-organized ABS box for easy storage and transport STURDY & ANTI-RUST, heavy-duty carbon steel construction; black anodic oxidation for ultimate anti-rust performancePackage Included: 1x Set of Wheel Bearing Adapter Tool