DUOYI Dual Clutch Transmission Remover Installer Tool DSG Clutch Unlock Tool W/ Box Compatible Ford Focus Fiesta Volvo DCT for Reusable DPS6-DCT F1FZ-7B546-B

Description: 【Dual Clutch Transmission Tool with Good Compatibility】: The dual clutch transmission remover installer tool is made of heavy-duty steel, which is corrosion-resistant and high in hardness. Perfectly compatible with Ford Focus DCT dual-clutch transmission DPS6. 【Professional Dual Clutch Transmission Tool】: Reuse the removed/previously installed dual-clutch assembly. It re-springs /re-trips the springs on the clutch so that the user can reinstall it. 【Durable Dual Clutch Transmission Tool】: The surface of the dual-clutch transmission remover installer tool is specially phosphate, which not only prevents rust, but also has a longer service life. With this tool, you will not need to purchase any new DCT clutch components. 【How to Use the Dual Clutch Transmission Tool】: Install the special tool and press the input shaft tightly. After the threaded bar is in contact with the input shaft, it rotates 20 times. 【All-In-One DCT Tool Set】: The dual-clutch transmission tool is equipped with a toolbox, which is very convenient for product organization and storage. If you have any questions about the product, our technical team will help you solve the problem within 24 hours. Specification: Material: Steel Color: Black + Blue Dimensions: 18.11 x 14.57 x 3.54" Weight: 13.45 lbs The Correct Way To Disassemble The Lock Step 1: Install the locking tool, and align the locking tool with the appropriate groove, in order to install the locking tool into the base cylinder. Step 2: Screw in the screws, pinch two wrenches and unscrew the bearing nuts. Step 3: After hearing a few crackling noises, remove the locking tool and confirm whether the internal card slot enters the round hole. Note: If the internal card slot does not enter the round hole, please continue this step. How To Install The Unlock Lock Correctly Step 1: Insert the locked double clutch, put in the mounting sleeve, install the extension feet on three sides to fix the appropriate holes, and fix the extension feet. Step 2: Unscrew the screws and observe whether they are in place. Once in place, remove the tool and install the retaining ring. Step 3: Remove the motors on both sides, insert the teeth of the motors with a hexagonal tool, and rotate them counterclockwise to the end (there is a clicking sound when rotating, and the double clutch slightly pops up). Step 4: Turn the other side counterclockwise again. Finally, install the motor. At this point, the dual clutch has been unlocked and can be loaded.