Banshee Automatic 12V Battery Charger with Full Over-Charge Protection, 2/12/75 AMP

2 Year Warranty. 30 Day Money Back Guarantee. Banshee Automatic Battery Charger/Maintainer/Engine Start SPECIFICATIONS = For Battery Type: All 12 V Lead-Acid Batteries Input Voltage: 110 VAC Output Voltage: 12 VDC Output Current Charge: 2A/12A Output Engine Start: 75A Dimensions: L= 10.25" x W= 8" x H= 5" Clamps Cable Length: 72" (6 ft) Power Cable Length: 42" (3.5 ft) FEATURES = Slow Charge (2A), Fast Charge (12A), Engine Start (75A), Maintainer Automatically maintains battery after fully charging Built-In Ammeter Charge SLI or Deep Cycle batteries with the flip of a switch 2 LED indicators: Power On & Full Charge 6 Foot long cord to alligator clamps Fully protected against Overcharge, Short circuit and Reverse polarity Metal Housing & Built-In Carrying Handle BUILT-IN AMMETER = Indicates the amount of current, measured in amps, that is being drawn by the battery.

As a battery takes on a charge, it draws less current from the charger. Correspondingly, the meter will show less current being drawn by the battery. When the current stops decreasing, the battery is charged. BATTERY TYPE SWITCH = Use this switch to set the type of battery to be charged. SLI: Starting, Lighting, & Ignition.

Most Maintenance Free batteries are SLI, also known as Flooded, Regular, or Standard batteries. Deep Cycle: Usually marked as "Deep Cycle" or "Marine". CHARGE RATE SELECTOR SWITCH = 2A - Slow Charge Rate: Intended for charging small batteries, like common garden tractor, snow mobile, & motorcycle batteries. 12A - Fast Charge Rate: Use for charging automotive, marine, & deep cycle batteries.

(Not intended for industrial applications.) 75A - Engine Start: Provides additional amps for cranking an engine with a weak or run-down battery. (Always use in combination with a battery.)